|
||||||||||||
|
HOME |
||||||||||||
 |
|
|
|
 |
|
|
|
 |
||||
|
||||||||||||
|
HOME |
||||||||||||
|
|
|
|
|
|
|
|
|
||||
| CELL PLANNING | ||
| Space Requirements | Minimum size for a cell is approximately 5' x 7', slightly larger if a toilet is to be installed. Federal prison cells average 8' x 10'. Solitary/isolation / strip cells, with no bed or toilet, can be as small as 3'6" x 7'. Standard doors are 3' x 7' and are available either hinged or sliding (boxcar style). | . Sample Cell |
| Construction | Depending on your security requirements, cell walls can be bars, cinder block, ply wood or wallboard over studs. A typical cell would have 3 cinder block, concrete or steel walls and one barred cell front across the front. | |
| Plumbing | Most prison combination sinks/toilets run on a pressurized water system. Typically they require 30 lbs pressure which usually means a 1" water line to your building. The water pressure is more important than the size of the water line. It is possible to install a pump to build the pressure. Typical home water lines are 3/4". | . |
| Installation | This is heavy duty equipment. The steel door with frame can weigh as much as 500 pounds, alone. It is recommended that you have a professional contractor install this equipment. PX:Direct can send our professional 2 man construction and installation team to your location for $750 a day plus travel and living expenses. | PX:Direct Construction and Installation Crew - $750 A Day Plus Travel and Living Expenses for 2 Man Crew. |
Click Below For Detailed Information On Jail Cells |
|||||
| Modular Jail Cell | Jail Doors | Cell Walls | Cell Furnishings | Cell Pricing | Used Cells |
